Handle Rear View Reverse Backup Tailgate Camera For Toyota Tacoma 2005-2014 2006

0.1 Lux sensitivity for enhanced night time visibility. Waterproof housing with anti-fog lens. RCA video output plugs into NTSC video input of most after market mirrors/video receiver.

Includes water-resistant 28 ft extension harness with a single heavy 8. Vision: Use the Chip Sensor and Lens of 360 System.

Image Sensor: 1/3 CCD Color Camera Starlight Night Vision. Output Resolution:(HD)1280720, (CVBS)1280480.

Image Frame Rate:(HD)25/30fps, (CVBS)50/60fps. Minimum Illumination:0.0001Lux/1.2F. Features: Marine/Waterproof, Night Vision, Distance Line.

Note: PAL/NTSC are optional, NTSC is in default and PAL provide per your request. Most monitor is suitable for both PAL and NTSC.

This product does not include keyhole covers. Includes water-resistant 30 ft extension harness with a single heavy duty sealed connector at tailgate and RCA connections for video. This is an aftermarket tailgate and camera, not OEM. If you plan to install this in a factory radio you most likely will need another connector(not provided). Cables must be run from the tailgate to the front at aftermarket radio. A 170 degree wide angle lens delivers a superior image day or night. Before you do anything else, first make sure that everything is okay and working as they should. Connect the camera to the monitor and check that they work. If everything is okay, then move on to step two. This step requires that you carefully remove the tailgate handle before replacing it. Install the new handle with the camera and screw it into place.

The trigger wire goes to the backup light circuit, while the video cable connects on the monitor. Ll need to unscrew and open up your rear lights for this. Also, with the tailgate open and lying flat, you can see a hole to pass the cable from the tailgate into the truck bed and then further along the side, to the cabin. Connect all the cables together and run a last check to make sure everything is properly fitted. Now just start up your truck, move into reverse, and your mirror monitor should light up.

This part is designed as an upgrade from the factory. We suggest professional installation as modification to your vehicle is necessary, and instructions are not included. 1x Power Cable & Video Cable.

(except weekends & official holidays). We will be very honored to provide you with quality service. We will try our best to resolve any kind of issue. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras". The seller is "transformers_us" and is located in this country: US.

This item can be shipped to United States, Canada, Mexico.

Brand: Soillar
Placement on Vehicle: Rear
Detection Angle: 135°(H), 170°(D),97°(V)
Type: Rear View Monitor w/Cam Kit
Manufacturer Part Number: 6909004020 Replacement
Color: Black
Interchange Part Number: 6909004020 Replacement
Other Part Number: 6909004020 Replacement
Surface Finish: Smooth Black
Manufacturer Warranty: 3 Year
Modification Description: Liftgate Handle
Features 1: Aftermarket Products
Features2: Full Color Camera
Feature3: RCA input
Parts Offered: Door Handle, Tail Gate Reverse camera
Plugs: RCA