Kenwood Multi View Rear camera water dust proof Backup CMOS-320 JAPAN import. Multi-view camera CMOS-320 [Main features]? Ensures high visibility in the front-back direction. Multi-view in-vehicle camera Equipped with a CMOS sensor with improved sensitivity compared to the previous model, achieving well-balanced and natural rendering. By connecting to a compatible navigation system, you can perform various operations on the touch panel of the navigation system itself.
You can also switch between 4 view modes. You can switch to a normal image that can be used as a guide line display for parking assistance and a front view camera. Variety of screen displays Equipped with 4 view modes You can choose from 4 view modes, including the "ultra-wide view" that achieves a horizontal angle of view of about 195 degrees, and the "bird's-eye view" that looks down from directly above. We are not disturbed by light such as the sun By adoption of image CMOS sensor without smear noise, smear noise that line of light enters up and down by strong light such as the sun does not occur. Switchable between mirror image and normal image It is possible to switch between a mirror image that can be seen in the same direction as the rearview mirror and a normal image when used as a front view camera.The industry's highest level of night vision capability through ultra-sensitive CMOS sensors and high-performance lenses Corresponding to the minimum subject illumination of 0.9 lux, it is possible to check the rear at night with only the light of the back lamp. We cope with poor environment Dust proofing, waterproofing of industry highest level IP67?
Dust proofing, waterproofing of equivalency is realized. It can be installed outside the vehicle in a harsh environment. Actual value based on KENWOOD in-house measurements [Specifications] Output image: Wide-angle mirror image (for checking backwards) / Wide-angle normal image (for checking forward) Imager: 1/3.6-inch color CMOS sensor Number of pixels: Approx.330,000 pixels Lens: Wide-angle, Focal length f = 1.05mm F value 2.0 Angle of view: Horizontal approx. 145 degrees Power supply voltage: 14.4 V (9-16 V) Maximum current consumption: Approximately 100 mA Video output: 1 Vp-p (75?
) Illuminance range: Approximately 0.9 to 100,000 lux Cable length: Camera section 1.5m Power cable 7.5m Switch unit section 1m External dimensions (W x H x D): Camera section 23.4 x 23.4 x 26.1mm Stitch unit section 27.5 x 32.8 x 12mm (excluding protrusions) Mass: Camera part approx. 23g (excluding cord) Switch unit part approx. It may be delayed due to the influence of the virus. I'm glad to meet you! I'm Japanese and I live in Saitama, Japan.
I will do my best to help you! If you want Japanese products, I will look for them. International Buyers - Please Note. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.