Wired Rear View Reverse Backup Camera System Kit 7 Monitor with Audio, Parking L
Wired Rear View Reverse Backup Camera System Kit 7 Monitor with Audio, Parking Lines, Waterproof Rate IP69K IR Camera for Tractor/Motorhome/Bulldozer/Snow Plow/Van/Heavy Equipment/Forklift/Skid Loader. 32ft extension cable X1, Monitor U-type bracket X1, 7 single view(not split) monitor X1, Waterproof color camera X1. This is a wired 7 single camera system. It contains a 32ft extension cable. Each end comes with 4-pin screw-lock cable, NO RCA. It ensures that all the connections are tight and stable, no worry about bad connection. The power input of this system is from DC12 to 24V.
So it can be used for large vehicles, such as trucks, buses, vans, rv and etc. With audio and parking line? 7 HD color monitor with upgraded touch buttons.
It takes max 3 video inputs. Monitor has been built-in with a loudspeaker to hear what is happening hehind your vehicle. With parking lines displayed on screen when reversing to help park safely. It not only displays image for backing, but also can display it all the time.
With built-in short-circuit protector and a TVS device to aviod damage caused by frequent improper vechile voltage. The image can be set as normal or mirror image by buttons, so the camera can be used as not only rear view but also front view.As the image can be set as various modes: mirror image, normal image, up-side-down image etc. So the camera can be mounted in any position of your vehicle, just press the buttons to set a right image. The camera has the highest waterproof and micro-dust proof level IP69K.
It not only can resist water, but also prevent the micro-dust from entering the glass. Built-in with 18 IR lights, you can see clearly and drive safe at night or when the ambient light is low. Built-in microphone to transmit the sound to monitor to hear what is happening. All the connectors are four pin screw-lock connectors, you just need to connect them together.
Then power the monitor with DC12-24v from taillight power or battery. Then press the power button, it will work. Support max 3 cameras video input With parking lines to park safe, and built-in loudspeaker to hear what is happening Monitor displays cameras one by one in single view, Normal/mirror image of each camera can be set separately by menu. Separate trigger control wire for each camera Monitor will be automatically switched to the image of the camera which is triggered, and back to the last mode when the trigger stops.The trigger delay time can be adjusted (0-4s) on each camera. In standby mode, monitor will turn on automatically when triggered and will switch to the image of the triggered camera. Working voltage: DC12-24V Built-in short-circuit protectorWhen installing and connecting the kit, people connects the female 4-pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a short-cut, the built-in protector may keep the monitor away from being burnt. CAMERA SPECIFICATIONS: Color CCD SENSOR Wide Angle, Waterproof, Night Vision and with built-in microphone to transmit sound to monitor PAL / NTSC system (optional) View angle: 120 degree Horizontal Resolution : 420 TV Line Video output: 1.0 Vp_p/75 ohm S/N ratio:48 db Waterproof:IP69K Electronic shutter: 1/60 -1/10000 sec Power Supply: DC12V.
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P.
Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.